Delfield N8273P Refrigerated Prep Tables

Delfield N8273P Refrigerated Prep Tables



Precio regular $13,157.00
$13,157.00
Precio de venta
Precio regular
Venta Agotado

From $249.98/week with



Need more information? Contact us today!

Delfield N8273P Refrigerated Prep Tables

Product Description

This self-contained, stainless-steel frost top with a 1-inch raised surface transforms any counter into an eye-catching, ice-cold display for cakes, pastries, salads, sushi, or grab-and-go beverages without the mess of ice or forced-air wells. The dimensions and amperage may vary slightly based on the production run or optional accessories. For more information on the warranty and coverage, please contact us.

Why you'll love it:

  • The 1-inch elevated heavy-gauge stainless-steel top keeps condensation off the counter.
  • The full-perimeter drain trough with a 1/2-inch drain speeds up cleanup and prevents puddling.
  • The generous 2-inch overhang creates a clean, integrated look.
  • The high-density polyurethane foam insulation locks the cold where it belongs.
  • The GreenGenius™ R290 refrigeration system delivers powerful cooling with low environmental impact.
  • The factory-installed push-in perimeter gasket drops straight into new or existing cut-outs, without requiring a silicone bead.
  • The on/off toggle switch and 8-foot cord with a NEMA 5-15P plug allow for true plug-and-play installation.
  • The included stainless-steel louver is for field-installed airflow.
  • It is cULus & NSF certified for safe food contact and electrical compliance.

Quick install checklist:

  • Make sure to provide the listed cut-out and maintain at least 1 inch of space around the louvered side for air flow.
  • Route the 1/2 inch drain line to a floor sink or condensate evaporator.
  • Plug the unit into a dedicated 15-amp, 120-volt electrical outlet - no hard-wiring is required.
  • Turn on the toggle switch and wait 30-45 minutes for the surface to frost before loading any product.

Product Specs

Specification Value
Exterior cut-out required 72 3⁄8 in. × 25 in. (184 cm × 64 cm)
Display surface (raised top) Approx. 65 in. × 18 in. (165 cm × 46 cm)
Compressor 1⁄3 HP, self-contained
Refrigerant R290 (eco-friendly propane blend)
Electrical 115 V / 60 Hz / 1 Ph, 5.0 A, NEMA 5-15P
Clearance below counter 8 in. (20 cm) to bottom of compressor assembly
Top elevation 1.68 in. (4 cm) above counter surface
Drain connection ½ in. ID stainless-steel
Shipping weight ≈ 210 lb (95 kg)
Certifications cULus, NSF 7
Warranty 1-year parts & labor

Features

Specification Value
Manufacturer Delfield
Certifications NSF, UL
Height 15.75in
Width 73.38in
Depth 26.0in
Shipping Weight 209.0lbs
Width (side - side) 72 - 120 inches
Compressor HP 1/4 HP compressor
Depth (front - back) 25"
Specifications Drop-In Frost Top, stainless steel 1" elevated top with drain trough & 2" overhang, galvanized steel exterior housing, on/off toggle switch, self-contained refrigeration, R290 refrigerant, 1/3 hp, (72-3/8" x 25" cutout required), cUL, UL, NSF
NSF
NSFNSF Certified – This product meets NSF International food safety and sanitation standards for commercial foodservice equipment.
UL
ULUL Listed – This product has been independently safety tested and certified by Underwriters Laboratories.

Pricing, availability, and product details are subject to change without notice. 24/7 Restaurant Equipment is not responsible for typographical errors or omissions. Freight charges may apply where applicable.