Delfield's largest N8100BP model provides ample space to hold, display, and serve chilled menu items. The N8181BP drop-in cold pan maintains NSF-7 food-safe temperatures, even in 86°F kitchens, fitting seamlessly into an 80-3/4" x 25" counter cut-out. Simply "drop it in", plug it in, and start merchandising six full-size 12" x 20" pans of cold product.

Features:

• The pan rest is built-in and stamped with a V-shape, so there are no thumb-screws or clips to lose.
• It can hold six 12" x 20" pans that are either 4" or 6" deep (pans sold separately).
• The refrigeration system uses eco-friendly GreenGenius™ R290 hydrocarbon refrigerant.
• The factory-installed electronic temperature control maintains the temperature between 33°F and 41°F.
• It is fully insulated with high-density, zero-ODP/GWP polyurethane foam.
• The top is made of durable 20-gauge stainless steel, and the inner liner is 22-gauge stainless steel.
• The outer body is made of galvanized steel with a 16-gauge compressor frame.
• It has a 1" diameter plastic drain on the left side (when facing the service side).
• Adapter bars for each pan opening and a stainless steel louver are included for field installation.
• It comes with a pre-installed press-fit gasket for a fast, non-marring countertop seal.
• It ships with an 8' cord and a NEMA 5-15P plug, so no hardwiring is required.

Features:

• Prepare the counter opening to 80-3/4" wide and 25" deep before placing the unit.
• Lower the pan until the pre-installed gasket sits flush on the counter surface.
• Install the included stainless steel louver to allow proper airflow for the condenser.
• Connect a 1" drain line to a floor sink or waste line.
• Plug the unit into a dedicated, grounded 15-amp electrical outlet and allow it to reach the desired temperature before adding food.