This powerful marine-grade drop-in food warmer from Vollrath is built to perform in demanding commercial and coastal environments. Capable of keeping three full-size pans piping hot all day long, its 1000W per well and 208-240V NEMA 6-20P power supply ensure consistent, reliable heating. The auto-fill system and individual infinite controls provide easy, convenient operation, making this the ideal choice to upgrade your buffet line or serving station.

Key benefits:

• The 20 gauge 316 marine-grade stainless steel wells are highly resistant to corrosion from salt, chlorine, and acidic foods.
• The auto-fill feature automatically maintains the correct water level, eliminating the need for constant refilling.
• The three independent 1000 W wells have infinite controls and power lights, allowing for precise temperature holding of multiple menu items.
• The energy-efficient insulation on every side and between the wells reduces heat loss and lowers operating costs.
• The drip-free 18 gauge stainless steel top with a factory-installed gasket provides a clean, finished appearance.
• The 1-inch copper manifold drain with a master shut-off valve and individual ball valves enables fast and controlled draining.
• It ships with a 6-foot cord and a NEMA 6-20P plug, eliminating the need for hard-wiring.

Perfect for:

• Buffets, cafeterias, and self-serve dining areas where food needs to be kept hot and ready to serve.
• Resorts, cruise ships, and coastal operations that require a low-maintenance solution to keep food warm and appetizing.
• Commissaries and catering kitchens that need a reliable hot holding system that requires minimal upkeep.

What's included:

• A high-quality Vollrath 3-well marine-grade drop-in hot well unit for your kitchen or catering setup.
• A remote control panel with a 4-foot cord, allowing you to easily adjust the temperature and settings.
• A factory-installed 6-foot power cord with a NEMA 6-20P plug, ready to be plugged in.
• A mounting gasket and positioning clips to secure the unit on counters up to 3 inches thick.
• A 1-inch copper drain manifold assembly for easy cleanup and drainage.
• A comprehensive installation and operation manual to guide you through the setup process.

Installation notes:

• The cut-out for the installation must have a corner radius of ⅞ inch (2.2 cm) and no extra space around the sides.
• This product can only be used with water - you must keep water in each well during operation.
• Make sure there is at least 6 ½ inches of clearance below the counter for the drain manifold and plumbing connections.
• Connect the product to a 208-240 volt, single-phase electrical outlet (NEMA 6-20R) and a cold water supply.