The SPEC SERIES® STR1FRI-1S is a reliable, high-performance freezer designed for busy commercial kitchens. With a top-mounted 3/4 HP system, this freezer maintains a consistent temperature of -10 °F, ensuring efficient temperature recovery even during periods of high-volume use. The stainless-steel cabinet is built to last, backed by True's renowned construction and an industry-leading warranty. This freezer accommodates a 27" × 29" × 66" rack (not included), allowing you to seamlessly integrate it into your workflow. Invest in a freezer you can depend on, shift after shift.

Key Features:

• The refrigerator uses a self-contained capillary-tube system with eco-friendly R404A refrigerant to maintain a temperature of -10°F (-23.3°C).
• The 3/4 HP compressor is located on the top, keeping critical components away from the floor and protecting them from splashes and debris.
• The large, epoxy-coated evaporator and oversized condenser provide rapid pull-down of the temperature.
• The single, solid stainless-steel door has lifetime-guaranteed cam-lift hinges and a bolt-style lock.
• The self-closing door stays open at 120° for easy loading of carts.
• A heavy-gauge stainless steel ramp is included, and interior bumpers protect the walls from cart impact.
• The refrigerator can accommodate roll-in racks up to 27" W × 29" D × 66" H (with inboard casters).
• The entire interior, including the walls, back, floor, ceiling, and door liner, is made of stainless steel for superior sanitation.
• The high-density, foamed-in-place insulation has zero ozone depletion potential (ODP) and global warming potential (GWP).
• The exterior digital temperature display can be set to show either Fahrenheit or Celsius.
• The shielded incandescent lighting provides clear visibility of the products.
• The automatic defrost system is time-initiated and temperature-terminated, with a fan delay for energy savings.
• The refrigerator is NSF/ANSI 7, cULus, and UL EPH classified, and it is proudly made in the USA.

Installation Requirements:

• The unit requires a dedicated 115 V / 15 amp electrical outlet within 9 feet of the unit.
• The doorway must provide at least 35 inches of width plus the depth of the ramp to allow for proper clearance.
• There must be a minimum clearance above the cabinet to allow for service access to the top-mounted system.